Insufficient power of the plastic film crusher machine may be caused by too loose belts, aging pulleys, motor failure, or belt wear. We need to regularly check the various parts of the small plastic shredder and solve the problem in time to ensure the normal operation of the small plastic shredder.
Plastic film crusher machine belt loosening
A loose plastic film crusher machine belt may be because the drive pulley is loose due to improper installation. When the pla shredder belt is loose, it can not be crushed properly, which will lead to low productivity. The solution is to tighten the drive pulley and adjust the belt tightness.
Aging of pulleys
The pulley of the pla shredder can become not strong enough due to aging after a long time of use. This may cause the belt to slip or even fail to drive the small plastic shredder properly. To solve this problem, you need to replace the pulley with a new one.
If the motor of the plastic film crusher machine has failed, it will not start properly and will not drive the belt. If the motor fails, it will need to be replaced with a new one.
If the belt is worn out, it can also lead to a lack of power in the plastic film crusher machine. When the pla shredder belt is excessively worn, it needs to be replaced with a new one in time.