Plastic bottle crush machine is widely used in the waste plastic recycling industry, a valuable water bottle crusher can bring you good economic benefits. We should know how to maintain and have some daily maintenance knowledge in the actual application. This will be able to extend the service life of mini PET crusher machines and bring us better economic benefits.
Before starting plastic bottle crush machine
- Before starting the water bottle crusher, you should first move the transmission wheel with manpower for one or two turns. Confirm that the movement of the crusher is flexible before starting.
- The plastic bottle crush machine can be fed only after normal operation.
- Mini PET crusher machine before stopping, should first stop feeding and will be in the machine material discharge. Then cut off the motor power.
- When the water bottle crusher is shut down, check whether the fastening bolts are firm and how the worn parts are worn.
Water bottle crusher operation
- Pay attention to the temperature of the bearings in operation, make sure the bearings keep good lubrication, and pay attention to the sound and vibration with or without abnormalities.
- When an abnormal situation is found, stop the plastic bottle crush machine to check whether it is stuck by unbreakable objects or whether the parts are damaged.
- Check whether the particle size of the crushed product meets the requirements.
- Keep the mini PET crusher machine feeding evenly to prevent overloading.
- When the plastic bottle crush machine can not be crushed, the moisture of the incoming material should not be too high.
- The worn parts of the water bottle crusher should be replaced or repaired in time.
- The safety device of the mini PET crusher machine should be kept in good condition.
