{"id":8036,"date":"2026-09-20T17:37:44","date_gmt":"2026-09-20T09:37:44","guid":{"rendered":"https:\/\/recyclingmachines.org\/?p=8036"},"modified":"2026-09-20T18:00:19","modified_gmt":"2026-09-20T10:00:19","slug":"paper-egg-tray-machine-running-in-zambia","status":"publish","type":"post","link":"https:\/\/recyclingmachines.org\/pt\/paper-egg-tray-machine-running-in-zambia\/","title":{"rendered":"Paper Egg Tray Machine Running in Zambia: A New Customer Production Case"},"content":{"rendered":"

Recently, we received a production video from a customer in Zambia who purchased our paper egg tray machine<\/strong>. The video shows the equipment operating at the customer\u2019s factory after the production line was put into use.<\/p>\n\n\n\n

For this project, the customer chose a compact egg tray production setup consisting of a pulping machine, egg tray forming machine, and drying room. The three stages work together to complete the basic production process from waste paper to finished egg trays.<\/p>\n\n\n\n

The main forming machine is a 3\u00d71 model<\/strong>, with a production capacity of approximately 1000\u20131500 pcs\/h<\/strong>.<\/p>\n\n\n\n

What Happens Before the Egg Trays Are Formed?<\/h2>\n\n\n\n

Before the forming stage, waste paper needs to be prepared as pulp. The customer uses the m\u00e1quina de pulping<\/a><\/strong> to break down the paper and mix it with water, producing pulp suitable for the next stage.<\/p>\n\n\n\n

The prepared pulp is then supplied to the forming machine. At this point, the pulp is shaped according to the egg tray mold, producing wet egg trays.<\/p>\n\n\n\n

This preparation stage is important because the condition of the pulp directly affects the forming process and the appearance of the finished trays.<\/p>\n\n\n

\n
\"sistema
sistema de pulpa<\/figcaption><\/figure>\n<\/div>\n\n\n

Forming Egg Trays with the 3\u00d71 Machine<\/h2>\n\n\n\n

The egg tray forming machine is the main production equipment in this project.<\/p>\n\n\n\n

O 3\u00d71 paper egg tray machine<\/a><\/strong> is designed with three molds on one working board. During operation, pulp is formed into egg trays through the molding process.<\/p>\n\n\n\n

With an output of around 1000\u20131500 pieces per hour<\/strong>, this machine configuration is suitable for customers who do not require a large industrial-scale production capacity but still need regular egg tray production.<\/p>\n\n\n\n

The customer\u2019s feedback video gives a direct view of the machine working at the factory rather than only showing the equipment before installation.<\/p>\n\n\n\n

\n
\"3x1
3×1 Egg Tray Molding Machine<\/figcaption><\/figure>\n\n\n\n
\"Egg
Egg Tray Making Machine Running at Customer Site in Zambia<\/figcaption><\/figure>\n<\/figure>\n\n\n\n

Drying the Freshly Formed Trays<\/h2>\n\n\n\n

The egg trays coming out of the forming process still contain moisture, so they need to be dried before being collected as finished products.<\/p>\n\n\n\n

In this Zambia project, a drying room<\/a><\/strong> is included in the production setup. The wet trays are transferred to the drying area, where moisture is removed before the finished trays are stored or prepared for further use.<\/p>\n\n\n\n

Therefore, the customer’s paper egg tray machine covers the three basic stages needed for this production process: pulp preparation, tray forming, and drying<\/strong>.<\/p>\n\n\n\n

\n
\"Drying
Drying Machine<\/figcaption><\/figure>\n\n\n\n
\"Egg
Egg Tray Drying Machine Used in Zambia<\/figcaption><\/figure>\n<\/figure>\n\n\n\n

Customer Feedback from the Factory<\/h2>\n\n\n\n

We value customer feedback after a machine is put into operation because it allows us to see how the paper egg tray machine performs under actual working conditions.<\/p>\n\n\n\n

The video sent by our Zambia customer shows the production equipment running at the factory. It also provides a practical reference for customers who are considering a similar paper egg tray production setup.<\/p>\n\n\n\n

Watch the Customer Feedback Video<\/h2>\n\n\n\n
\n