Plastic pellet making machines can turn waste into treasure, which greatly promotes our economic progress. When operating the extrusion machine, we must strictly comply with the regulations. We have to lubricate the extrusion machine and inspect the plastic pellet making machine regularly. Then what are the lubrication tasks of the extrusion machine?
Regular lubrication
Granulator for plastic recycling in the use of the process, you must regularly add lubricating oil to ensure better use of the components. When refueling the granulator for plastic recycling, do not let it flow around the machine and on the ground. This not only easy to cause material pollution but also affects product quality.
The turbine box of the plastic pellet making machine must store oil for a long time. Plastic granulator in the use of the process, be sure to replace the new oil every three months, so as to avoid the oil being contaminated, affecting the use of the effect.
Pay attention to plastic pellet making machine tank
The case of the granulator for plastic recycling should be filled with oil before opening. During operation, lubricating oil can be added according to the temperature rise of each bearing and the operation. When operating the extrusion machine, you need to check the temperature change of the body at any time. If the tampon is touched with a clean hand and it does not stick to the hand, the temperature should be raised immediately. Until the tampon sticks to the hand, this is a normal phenomenon.
Attention to extrusion machine reducer shaft
When the plastic pellet making machine reducer shaft makes a noise, lubricant should be added in time. The operator must be familiar with the operation of the machine. When the temperature of the granulator for plastic recycling is too high and the speed is too slow, timely adjustments should be made according to the situation.
